- Customer group: Gast
You do not have any products in your shopping cart yet.
» » » Force 75 Print Controller
Konica Force 75 Print Controller memory
RAM memory (expansion)
System: Drucker-Printer RAMMemory ex factory: ---
Maximum RAM: 256MBMemory slots: 2(2 banks of 1)
128MB
RAM memory extension
SDRAM-100 non-ECC
Konica item number MU-402
29,80 EUR1 pcs.: 29,80 EUR
from 2 pcs. per: 29,26 EUR
64MB
RAM memory extension
Konica item number MU-401
24,90 EUR1 pcs.: 24,90 EUR
from 2 pcs. per: 24,45 EUR
32MB
RAM memory extension
SDRAM-100 non-ECC
Konica item number MU-400
19,90 EUR1 pcs.: 19,90 EUR
from 2 pcs. per: 19,54 EUR
Konica Force 75 Print Controller Memory Configuration
The maximal ram memory expansion is256MB ram. For memory upgrade there are 2(2 banks of 1) ram slots.
Our maximum memory specifications may differ from those of the manufacturer as they may be obsolete. New memory technologies or bios or software patches make this possible with the same performance and stability.
We recommend for your Force 75 Print Controller Drucker-Printer a maximum upgrade with 256MB RAM.
A system upgrade is recommended if you are working with several memory-intensive programs at the same time. At least 1 or 2GB of memory should be installed.
Important information about your system memory (RAM)
Your system supports only memory modules with selected memory chips. If you think you have found a store for a lower price elsewhere, then it is possible that the cheaper memory chip will not work.
Memory from our website is 100% compatible with your system,
or you get your money back!